Camco 65505 Do-It-Yourself Sterndrive Boat Winterizer KitThe Camco 65505 Sterndrive Boat Winterizer provides a convenient way to flush and winterize a marine engine’s raw-water cooling system. Its dual-valve adapter lets you warm and flush the engine with fresh water before switching the cooling-system supply to marine antifreeze.Allowing the engine to reach operating temperature opens the thermostat so antifreeze can circulate through the engine block and raw-water cooling passages. According to Camco, thermostat removal is unnecessary when the included winterization procedure is followed correctly.Product FeaturesDesigned for do-it-yourself sterndrive engine winterizationFlushes particulates and impurities from the raw-water cooling systemSeparate valves control the fresh-water and antifreeze suppliesSwitches from fresh water to antifreeze without disconnecting the systemAllows the engine to reach operating temperature before antifreeze is introducedReusable components can be flushed, dried and stored after winterizationHow It WorksConnect a fresh-water supply to the winterization valve, then connect the valve output to a garden hose and compatible engine flusher. Install the flusher over the water intake on the outdrive and run the engine at idle until it reaches operating temperature. The valves are then used to close the fresh-water supply while opening the antifreeze supply, directing antifreeze into the raw-water cooling system.What You Will NeedPropylene-glycol marine engine winterizing antifreeze with burst protection of at least -50FFresh-water supplyGarden hoseCompatible engine flusherEngine flusher is not included.Recommended Motor FlusherFor compatible outdrives with side water intakes, we recommend the Moeller 099076-00 Universal Motor Flusher. Confirm that the flusher fits securely over all cooling-water intake openings before operating the engine.Important Usage InformationRead the Camco instructions and engine manufacturer’s winterization procedure before beginningPosition the filled antifreeze container above the engine intake and winterization adapterAllow antifreeze to reach room temperature before use for improved flowOperate the engine at idle during the flushing and winterization processShut down the engine immediately when the antifreeze container is emptyFlush the winterizer components with fresh water and allow them to dry before storageView the Camco 65505 Sterndrive Boat Winterizer Instructions (PDF)