Hawk Epoxy C2 Slow CatalystThe Sea Hawk Hawk Epoxy C2 Slow Catalyst can be used with Hawk Epoxy Resin for building or repairing planes, surfboards, canoes, boats, and many other substrates. Designed for construction or repairs with superior adhesion, filling, bonding, strength, and moisture barrier qualities at higher temperatures for a very slow speed at room temperatures.Pair Hawk Epoxy C2 Catalyst with corresponding letter size on R1 Resin.Example: Size 1 C2 Slow Catalyst quart requires Size 1 Hawk Epoxy R1 ResinSea Hawk Hawk Epoxy C2 Slow Catalyst compares to West System 206 Slow HardenerFeatures:Good for warmest conditionsLong pot lifeGood for when more time is neededSpecs:Minimum Recommended Temp: 60 FPot Life @ 70 F : 20-25 minutes (6 oz.)Working Time Thin Film: 90-110 minutesCure to Solid Thin Film: 10-15 hoursCure to Working Strength: 1-4 daysMix Ratio Resin/Catalyst – 5:1Click here to download Hawk Epoxy C2 Slow Catalyst Tech sheetFrequently Asked QuestionsWhat is Hawk Epoxy C2 Slow Catalyst used for?Hawk Epoxy C2 Slow Catalyst is designed to be used with Hawk Epoxy R1 Resin for construction and repair applications involving planes, surfboards, canoes, boats, and other substrates. It provides adhesion, filling, bonding, strength, and moisture barrier qualities, with a slow cure designed for warmer conditions and applications where more working time is needed.Which Hawk Epoxy Resin should be used with C2 Slow Catalyst?Hawk Epoxy C2 Slow Catalyst should be paired with the corresponding letter size on Hawk Epoxy R1 Resin. For example, a Size 1 C2 Slow Catalyst quart requires Size 1 Hawk Epoxy R1 Resin.What temperature is Hawk Epoxy C2 Slow Catalyst recommended for?The minimum recommended temperature for Hawk Epoxy C2 Slow Catalyst is 60F. The catalyst is designed for warmer conditions and provides a very slow cure at room temperatures, making it suitable when additional working time is needed.What is the mix ratio for Hawk Epoxy C2 Slow Catalyst?Hawk Epoxy C2 Slow Catalyst uses a 5:1 mix ratio of resin to catalyst. The resin and catalyst should be combined according to this specified ratio for the epoxy system.How long is the working time with Hawk Epoxy C2 Slow Catalyst?At 70F, the pot life is approximately 20-25 minutes for a 6-ounce mixture. The working time for a thin film is approximately 90-110 minutes. A thin film cures to a solid in approximately 10-15 hours, while cure to working strength takes approximately 1-4 days.//