Interlux Micron CF Bottom PaintAntifouling Copper-Free Paint with EconeaMicron CF features all the fantastic benefits of Micron technology-without copper. Micron CF is your multi season antifouling solution with its Biolux Slime Blocking Technology to combat slime and Econea to ward off barnacles and zebra mussels. Micron CF features self polishing that reduces paint build- up and the self-smoothing paint reduces friction and improves fuel efficiency. Micron CF is available in 4 bright colors including Shell White as well as a crisp black. A high solids formulation, Micron CF offers reduced solvent emissions and is VOC compliant. Safe on all hull materials.FEATURES:No sanding or prep work required.Copper free formulaHaul & Relaunch without repaintingReduced solvent emissionsTouch dry 1 hour; Dry to overcoat 2 hours; Dry to launch 6 hours minimumVOC compliantWhy Micron technology?Micron Technology is the basis of all Micron bottom paints and the formulations are second to none. Micron Technology was first introduced to the industry in the early 80’s and has evolved into the class leading antifouling paints.- Longest lasting, multi-season ability to haul and re-launch without repainting- Controlled polishing like a bar of soap reduces paint build up, eliminating the need for sanding- Micron Technology polishes to a smoother surface than hard antifoulings – maximizing fuel savings- Unlike old fashion high copper bottom paints, Micron uses less copper more efficiently for longest lasting antifouling protectionMicron Technology vs old fashioned hard antifoulingsAfter many years of using old fashioned hard high copper bottom paints, the paint film continues to build up, become brittle, and starts to crack and flake off. Micron Technology antifoulings polish at a controlled rate and therefore will never build up. It is this controlled polishing that enables Micron to be used on all boats, in all waters, and at all times! No paint build up means that you will never have to remove old layers of Micron and spend precious hours or money each time you want to repaint.Micron Technology and fuel savingsThere’s another added benefit to controlled polishing: fuel savings! The roughness caused by old fashioned hard high copper bottom paints creates extra drag on boat bottoms requiring the use of more horsepower. With extra horsepower comes extra fuel consumption, extra fuel consumption means more money at the fuel pump. There is only one way to ensure that the bottom is smooth and that is to choose Micron Technology. Micron Technology antifouling polishes at a controlled rate leaving your bottom smooth – remember the smoother the bottom paint, the lower the resistance; the lower the surface resistance the better the fuel economy.————————————————————————————————How To Apply Micron CFAPPLICATION DATA METHOD: Airless Spray, Brush, Conventional Spray, Roller DO NOT SPRAY without following proper safety procedures for spray application. NUMBER OF COATS: 2 DRY FILM THICKNESS PER COAT:2 mils (3 wet mils)COVERAGE:518 sq. ft/gal. APPLICATION TEMP: 41F Min. / 95F Max.THINNER: Special Thinner 216DRY TIMES:TempTo TouchTo RecoatTo Launch95F1 HR2HR4HR73F2 HR4HR6 HR50F3HR6 HR9HRPREVIOUSLY PAINTED SURFACES: In Good Condition with Pacifica or Trilux 33: Sand with 80 grade (grit) paper. Remove sanding residue. TBT Copolymers: If these coatings are more than a year old, wet sand the surface with 80 (grit) grade paper to a clean, firmly attached surface. Remove sanding residue. Apply 1-2 coats of TBT Sealer. Sand surface with 80 grade (grit) paper to a clean firmly attached surface. Remove sanding residue. Non-TBT Copolymers: Apply 1 coat of Primocon. Har